Calibration

Support for your Robot Army Starter Kit.

Calibration

Postby spetku » Sun Oct 05, 2014 7:07 pm

Several people have noticed that when they calibrate their robot as the instructions show, the robot's max height seems too high. You'll know the robot's max height is calibrated wrong because it will look wobbly, floppy, or just sorta strange when transitioning from point to point. If you notice this problem, you can put the brain into calibration mode, then remove your delta's paddles (the grey arms) and put them back on at a slightly lower pitched angle. When you put the delta in up/down mode, it should match the image in step 19 of the instructions http://robot-army.com/deltaInstructionsREV_C.pdf.

We'll shoot a short video to demonstrate incorrect and correct calibration and post it in this thread soon!
world domination is easier with robots.
User avatar
spetku
Site Admin
 
Posts: 11
Joined: Sat Feb 22, 2014 5:58 pm
Location: Las Vegas

Return to Robot Army Starter Kit

Who is online

Users browsing this forum: No registered users and 1 guest

cron